Launch 500ML Can Cooler
 |
18/8 STAINLESS STEEL
Made with 304 Food-Grade Stainless Steel, so they're punchure and rust resistant
|
 |
DOUBLE-WALL VACUUM INSULATION
Keeps cold drinks cold and hot drinks hot until the last sip.
|
 |
LASER ENGRAVING
Make it your own by adding personalisation for only R50.
|
Please Note: Our current turnaround time for engraved flasks is
NB - We cannot engrave emojis
Live Engraving turnaround time is shown above the colour options
An Additional item will show in your cart as "Item Personalisation" This should not be removed, if removed we will not Personalise your flask
Keep your can cold, your hands dry, and your drink exactly where it should be.
The Lizzard Can Cooler is a double-walled, vacuum-insulated holder built for everyday use — braais, pool days, game drives, or just your regular Tuesday. Slide in a 500ml can and it stays cold for 2+ hours, cool for up to 24, with zero condensation dripping down your hand.
Bonus: Remove the can and it doubles as a cup, so it pulls double duty long after the can's empty.
Why the inside counts:
- 304-grade stainless steel (inner & outer) — pure taste, no retained flavours, and built to last
- Copper inner coating — boosts temperature retention so cold stays cold, longer
- Vacuum seal — locks in heat and cold, double-walled for maximum insulation
- Powder-coated exterior — sweat-free, scratch-resistant, durable finish
- Lead-free, food-grade 18/8 stainless steel — 0% lead in the composition
Size: 16cm (H) x 7cm (W) · Fits most standard 500ml cans
| Colour |
Black - 500ml, Bushwillow - 500ml, Froth - 500ml |
|---|---|
| Size |
One Size |
Advanced vacuum insulation technology that helps maintain your drink's temperature for longer by reducing heat transfer.
An internal copper thermal layer improves thermal efficiency, helping beverages stay hot or cold for longer.
Premium food-grade stainless steel that is durable, corrosion-resistant, odour-resistant, and designed for everyday food and beverage use.
Vacuum insulation prevents external condensation, helping keep hands and bags dry.
Premium textured coating that enhances grip while improving wear resistance. Available in Black, Bushwillow and Froth.
A slim, close-fitting profile barely wider than the can itself — easy to grip, and compact enough to sit in a standard cup holder where bulkier sleeves and holders don't fit.
Premium 18/8 (304) stainless steel naturally resists rust and corrosion, helping maintain appearance and performance over years of daily use.
Manufactured using lead-free materials for safe, everyday food and beverage contact.
Designed for a 500ml can format — beer, cider, soft drinks, sparkling water, energy drinks and canned cocktails.
When the can is finished, remove it and use the Can Cooler as a standalone drinking cup. One product, two functions.
The insulated construction keeps the outside dry, even with ice-cold beverages.
Designed with smooth internal surfaces and wide openings to simplify cleaning and everyday maintenance.
Built for years of daily use, helping reduce reliance on single-use plastic bottles and disposable cups.
Designed for commuting, work, travel, outdoor activities, and everyday hydration.
Combines premium materials with advanced insulation technology for reliable everyday performance.
Black, Bushwillow and Froth. All three identical in performance, fit and construction.
Personalise your Can Cooler with laser engraving for R50 — make it uniquely yours.
Dimensions & Fit
| Height | 16 cm |
|---|---|
| Width / Diameter | 7 cm |
| Internal Opening | 7 cm |
| Profile | Slimline — barely wider than the can it holds |
| Cup Holder | Fits a standard cup holder |
| Can Compatibility | Most standard 500ml cans |
Construction & Materials
| Construction | Double-Wall Vacuum Insulation |
|---|---|
| Outer Wall | 18/8 (304) Food-Grade Stainless Steel, Durable Powder-Coated Finish |
| Inner Wall | 18/8 (304) Food-Grade Stainless Steel, smooth odour-resistant interior |
| Thermal Layer | Internal Copper Thermal Layer |
| Exterior Finish | Durable Powder-Coated Finish |
| Durability | Corrosion-Resistant Stainless Steel |
Performance
| Cold Retention — Ice Cold | 2+ hours |
|---|---|
| Cold Retention — Cool | Up to 24 hours |
| Exterior Performance | Condensation-Free Exterior |
| Best Practice | Pre-chill before use for best cold retention |
Materials & Care
| Food-Grade Rated | Yes — meets international food-safe standards |
|---|---|
| Lead-Free Materials | Yes |
| BPA-Free Components | Not applicable — no plastic beverage-contact components |
| Cleaning | Hand wash recommended to preserve the finish; dishwasher safe |
| Drying | Dry thoroughly after washing |
Beverage Compatibility
| Compatible With | Beer, cider, soft drinks, sparkling water, energy drinks, canned cocktails |
|---|---|
| Standalone Cup Use | Yes — doubles as a cold drink cup when no can is inserted |
Variants
| Colours | Black, Bushwillow, Froth |
|---|---|
| Size | One Size (500ml can fit) |
| SKU | FF2466 |
The Lizzard Can Cooler keeps a 500ml can ice cold for 2+ hours, and cool for up to 24 hours. For best results, pre-chill the Can Cooler before inserting your drink.
The Can Cooler fits most standard 500ml cans available in South Africa — including beer, cider, soft drinks, sparkling water, energy drinks and canned cocktails. The internal opening is 7cm wide. It is not designed for 330ml cans or non-standard can shapes.
An internal copper thermal layer improves thermal efficiency, helping beverages stay hot or cold for longer. Copper conducts and distributes temperature more effectively than stainless steel alone.
No. Vacuum insulation prevents external condensation, helping keep hands and bags dry. Your hand stays dry and your grip stays firm.
Yes. Remove the can and the Can Cooler works as a standalone cold drink cup.
Made from durable 18/8 (304) Food-Grade Stainless Steel for long-lasting everyday use. It has an internal Copper Thermal Layer for improved thermal efficiency, and a Durable Powder-Coated Finish on the exterior.
Yes. Manufactured using lead-free materials for safe, everyday food and beverage contact.
BPA-Free Components applies to products with plastic parts in beverage contact. The Lizzard Can Cooler is made entirely from 18/8 (304) Food-Grade Stainless Steel with no plastic beverage-contact components, so BPA is not a factor in this product.
Yes. The slimline profile is barely wider than the can it holds, so it fits a standard cup holder — as well as side pockets and bag sleeves that bulkier sleeves and holders won't.
No. The Can Cooler is an open-top design, built to hold a standard 500ml can or to be used as a standalone cold drink cup.
Three colours: Black, Bushwillow and Froth. All three are identical in performance, fit and construction.
Hand washing is recommended to preserve the Durable Powder-Coated Finish. Rinse with warm water and mild dish soap using a soft cloth. The smooth 18/8 (304) stainless interior is easy to clean.
Designed with smooth internal surfaces and wide openings to simplify cleaning and everyday maintenance. Rinse with warm water and mild dish soap, and dry thoroughly to maintain the Durable Powder-Coated Finish.
Yes. The Can Cooler is designed for every standard 500ml can format — beer, cider, soft drinks, sparkling water, energy drinks and canned cocktails.
Double-Wall Vacuum Insulation works in both directions, so it will hold temperature for a hot drink used as a cup. The Can Cooler has no lid and is positioned as a cold drink product.
No. Premium 18/8 (304) stainless steel naturally resists rust and corrosion, helping maintain appearance and performance over years of daily use.
Yes. It is a practical, well-made gift that works regardless of what the recipient drinks — it suits every 500ml can format, and doubles as a cold drink cup.
Yes — laser engraving is available for personalisation at R50. Turnaround time is shown above the colour options on this page.
Double-Wall Vacuum Insulation and an internal Copper Thermal Layer keeps any standard 500ml can colder for longer — with a Condensation-Free Exterior that keeps hands and bags dry.
Double-Wall Vacuum Insulation helps keep canned drinks colder for longer — ice cold for 2+ hours, and cool for up to 24.
Most can holders are a fabric sleeve. The Lizzard Can Cooler is double-walled and vacuum insulated, making your drink stay colder for way longer.
The Condensation-Free Exterior means no moisture forms outside, so your hand stays dry and there are no rings on the table.
Beer, cider, soft drinks, sparkling water, energy drinks, canned cocktails — built for the full 500ml can range, not one category of drink.
When the can is finished, remove it and use the Can Cooler as a standalone cold drink cup.
Barely wider than the can it holds, you don't need to worry about it not fitting into your cup holder — where bulkier sleeves don't fit.
The Durable Powder-Coated Finish is a premium textured coating that enhances grip while improving wear resistance — in Black, Bushwillow and Froth.
Made from durable 18/8 (304) Food-Grade Stainless Steel for long-lasting everyday use. Corrosion-resistant and odour-resistant — built for years, not a season.
Built for years of use from durable stainless steel, the Lizzard Can Cooler is a reusable alternative to short-lived can sleeves and holders.
Takes the braai seriously, and the drinks just as seriously. Whatever is in the can, it stays cold for the full event.
Game drives, hiking days, camping weekends — environments where a cooler box isn't always within reach.
Stadiums, club days and matches with mates. Cold drinks matter, and so does a dry grip.
A durable stainless steel alternative to short-lived can sleeves and holders. Built for years of use, and fully recyclable at end of life.
18/8 (304) stainless steel is corrosion-resistant, odour-resistant, and 100% recyclable — designed to perform for years, reducing how often it needs replacing.
The Do's And Don'ts When Cleaning Your Flask
Flask Care
- Remember to hand wash your flasks and lids daily with warm water and non-abrasive dish soap. If you have a straw lid, don't forget to rinse your straw too.
- Do not use cleaners with harsh chemicals like bleach or chlorine as they can ruin your flask.
- Do not soak for long periods.
- Dry with a cloth to avoid marks.
- Look at the bottom of your flask to see if it is marked dishwasher safe.
Removing The O-Rings
Use a fork, toothpick or unfolded paper clip to gently pull it out of the lid.
O-Ring Care
- Carefully remove the O-Rings from your lid.
- Soak them overnight in warm water and white vinegar.
- Thoroughly rinse them and make sure they are completely dry before re-inserting them into your lid
OUR MISSION
Our commitment is to protect and preserve the environment for future generations by minimizing single-use plastic waste choices today. Through responsible practices, we aim to reduce our impact and encourage others to join us in creating a cleaner, more sustainable world. We are also committed to reducing plastic packaging. Most of our flasks, and soon all, will be packaged using FSC-certified materials, ensuring they are both recyclable and sustainably sourced. The FSC label guarantees that the packaging meets high environmental and social standards set by the council.
QUALITY OVER ALL
OUR LOGO REPRESENTS ONLY THE VERY BEST QUALITY AND PRODUCT EXCELLENCE.
Lizzard is proudly designed and owned in South Africa. We are committed to supporting our local economy by ensuring that profits and proceeds remain within the country, prioritizing local resources, talent, and production whenever possible.
Create Your Own Collection
Here at Lizzard, we are making it our mission to expand on customer satisfaction. With your artwork, we extend ourselves to personalising our product to fit your tailored needs. The artwork will be laser-engraved onto the flask with precision. Make your flask look truely unique, get in touch with our team and they will be sure to make your flask turn some heads.
View Corporate Branding